No tweets to display


How to wire Remote STROBE Controller from OLB

The remote strobe controller is an inline strobe unit. Which means you simply put the box in line with the lights you want to strobe. The trick is it must be after the switch, after the relay, after the fuse and just before the light(s). Her is a quick diagram that should clear up any questions.

wiring dia

 

HIDs vs. LEDs for Headlight and Fog Light Replacement bulbs.

Install time:
HIDs 30-60 mins per set. Requires harness and in most cases a resister pack. (Professional install recommended)
LEDs 5-10 mins per set. No bulky harness and only in some cases needs a resister pack on “mopar” vehicles.

Warranty:
HIDs 2 years on bulbs
LEDs Limited lifetime on full kit

Brightness:
HIDs Approx 1000 lumens
LEDs 1800-2200 lumens and 15-20% wider and longer views than HIDs

Costs:
HIDs $70-$85 per kit
LEDs $125-$140 per kit

Legality:
HIDs Not 50 state on-road legal
LEDs 50 state road use legal

Kelvin(color):
HIDs Shades include 3k-yellow tint 4300-white, 6k- light blue tint, 8k blue tint. As the k ( kelvins) go higher, the dimmer the bulb gets. Also the color is what makes it easy for law officials to spot HID equipped vehicles.
LEDs 6k equivalent. Crisp white and matches LED light bars, cubes, etc.

Life span:
HIDs. 2,500-4,000 hours
LEDs. 20,000-25,000 hours.

To pick up a set of HID bulbs, LED bulbs or a complete headlight conversion- check out our custom lighting store!!

Custom Offsets Custom Lighting Store

 

 

 

Installed OLB LED Light Bar Gallery 50″ 40″ 30″ 20″

CaptureTruck2Truck3image2image111100858_799923203409778_639184805_n

 

wheel decals

 

11160505_799923093409789_269057185_n11160421_799923106743121_1008685122_n11173529_799923200076445_1418604588_nCaptureCapture101 ram201 ram10154139_785283864878884_462988372592561764_nPics of some of the sexiest OLB light bar trucks out there!! Send yours to sales@offroadledbars.com and we will show off your killer OLB setups!

Curved 50″ OffRoad LED BAR

30 inch superduty 30 inch superduty2

IMG_1159

single curved gmc stacked 50s 20 cubes

1012040_405702286241159_1795981544_n curved dual 50 close ups curved dual stacked curved toyota single dodge stacked curved dual 30s in grill

1aaaaa

IMG_20131206_111859

IMG_20131130_172400

Capture IMG_20131116_214252 IMG_20131116_193340 IMG_20131112_155418 IMG_20131031_213123 IMG_1439 imagejpeg_0-1 photo 5 IMG_26011475059188 IMG_16125066293860 IMG_7699 IMG_3428 20131125_154728 20131104_175739 IMG_20131013_204545 IMG_20130826_200303 IMG_9430 IMAG0883 IMG_2001

10064215616_21281c5aa6_b 10122972194_24885c56b7_b

50" curved dual stack

50″ curved dual stack

3

20″ mounted on skid plate

6" pair behind the grill

6″ pair behind the grill

50" and 20" GMC bumper mount

50″ and 20″ GMC bumper mount

20" on the bull bar

20″ on the bull bar

30" behind the grill GMC with Extreme Mounting Bracket (EMB)

30″ behind the grill GMC with Extreme Mounting Bracket (EMB)

40" behind the grill 2009+ Ford F-150 with EMB

40″ behind the grill 2009+ Ford F-150 with EMB

40 and 20 inch with grille brackets and bumper brackets

40 and 20 inch with grille brackets and bumper brackets

super duty bumper 3 inch cubes w our custom brackets

super duty bumper 3 inch cubes w our custom brackets

 

jeep2

Super Duty bumper 20 inch with our custom brackets

Super Duty bumper 20 inch with our custom brackets

1 2 3 5 7 8 9 11 13

Ford F150 with 50" curved OLB complete kit

Ford F150 with 50″ curved OLB complete kit

 

 

 

 

 

Q: Why are some of my LEDs on my light bar flickering?

bad relayA: The problem/solution to this issue is the relay. A new one can be purchased at Autozone for $5. You would need a 40 amp relay.

 

20″ (OLB) Off Road LED light bar Review – Reviewer: Team Stance Sponsored Crew – Robert Fair

Product is the 20″ Offroad LED Bars (OLB) 20″ LED light bar.

To Purchase —> 20″ light bar for sale

The install on the led light bar is very simple. What I did was run the wires through the fire wall (running the switch into the cab). Bolted my relay to the side wall out of the way and then hooked up to the battery (using the optional standard harness, recommended). From there I then ran my wire that goes from battery to the light bar down by the radiator to the front. Then ran it out through the mesh of the grill. That was it for wiring.

1601236_579375052155590_328180651_n

Then I bolted the led bar to the brush guard (using the free brackets included with every 20″ bar) and plugged it in.

Capture

Very bright and very easy to bring to life!!

its bright

This is running just the light bar and no headlights or fogs.

light bar only on no heads

Team Stance final decision:

This product gets the Green Light!!

green light

 

team stance my version

 

Q: How do I stop wind noise from my 50″ Off Road LED Light Bar?

A: Because all light bars have fins for cooling, all makes and brands have a chance to whistle at highway speed, but I have great news! You can almost completely eliminate this howling or screeching noise. Better news, it will cost you less than $10 and 15 minutes. The entire noise is coming from the wind whipping past the cooling blades on the back of your new LED light bar. Though you need air to move around and past your light bar for cooling, you don’t need so much you can’t hear your stereo!

Go to any local hardware store and purchase a door seal kit. You are NOT looking for the foam surrounds, but rather the rubber flap (about 1 to 1.5″ wide) that goes on the bottom of the door. Here are the ones we have had great success using (once installed you can hardly see them so we typically use the brown version).

White (you will need 2):

http://www.amazon.com/M-D-Building-Products-5587-Adhesive/dp/B00005202H/ref=sr_1_1?s=hi&ie=UTF8&qid=1389480499&sr=1-1&keywords=Self+Adhesive+Door+Sweep%2C+36+Inches

Brown (you will need 2):

http://www.amazon.com/Frost-King-DS101BA-Self-Stick-36-Inches/dp/B000BQWUQA/ref=sr_1_2?s=hi&ie=UTF8&qid=1389480499&sr=1-2&keywords=Self+Adhesive+Door+Sweep%2C+36+Inches

Or pick a pair up over at home depot

http://www.homedepot.com/p/Frost-King-E-O-1-1-4X36-Self-Stick-Door-Sweep-Brown-DS101BH/100194335#

weather strip

Be sure to get the version with the tape vs the nail on! You will obviously need 2 as they are 36″ long and your light is about 50″. We install them by putting them between the first and second blades on the top of the light bar, nearest the windshield. Simply install the first 36″ strip to the light bar then measure and cut the second strip. Be sure that you match the uncut edge to the other strip to create a clean look at the joint, the cut end will hide better up against the end of the light bar.

This strip will GREATLY reduce, if not completely eliminate the noise! Better yet it’s less than $10, 15 minutes, and you can hardly see it.


 

Q: How bright are LEDs and HIDs, what are some patterns?

A: check back on this one often we will keep adding pics of different temperature lights and styles of light bars and beam angles as we get more pics.

Here you see the 6k temp HID head light bulbs and ballasts in action, then the CURVED 50″ CBAR, and our 50″ straight LED light bar.

beams

 

This is the 50″ straight bar at highway speeds!

50 inch beam

 

Stock headlights on a newer Ford F150, then flipping on our 20″ LED light bar.

20 inch bar beam

 

Our Gen2 Cube lights in a FLOOD beam:

imagejpeg_0

 

Same Gen2 Cube lights in a Spot Beam:

imagejpeg_1

 

Q: LIMITED LIFETIME WARRANTY – What is for LED light bar and other LED items?

OffroadLEDbars keeps the process very simple and consumer friendly. Our goal is not to sell you one light bar but to be your go-to for all custom lighting and more. We want to be a part of this round of your custom vehicle work and many more to come. We are a very personable business and aim to wow our customers.

Below is the more technical, flyer version of the warranty.

Basically it covers the original buyer on any manufacturing defects. If for some reason your light were to fail we would replace the light at no charge and cover the shipping back to you.

Here are some specifics of what’s in or out.
1) Light must be not be tampered with. (Unless we have authorized in writing and attempted to help you with a simple mechanical fix.)
2) Customer must send the code on the white tag on the cord.
3) Customer pays for return shipping and we ship replacement.
4) We cover diode failures, lens breakage, water retention, and any other mechanical failures.
5) Please note: We do NOT cover bolts rusting.

See below for our warranty flyer.

warranty info

 

Q: What are the actual length dimensions of LED light bars?

 

A: The actual length is 1.5″ more for the whole light, beyond the advertised length. With the standard mounting feet attached the overall length is 2.5″ more than advertised length.

For example, the 40″ light bar is actually 41.5″ in length without the mounting feet and 42.5″ in length with the mounting feet.

The width of the 6″, 12″, 20″, 30″, 40″ and 50″ light bars is 2 3/8″ wide for the outside dimensions.

 

Eclipse

Thank you for using Eclipse.

We designed Eclipse to be as user friendly as possible, but if you do run into trouble we provide a support forum, and precise documentation.

WordPress

We offer financingFacebook reviews