Online Store / Spacers / 1.25" / Aluminum /

Aluminum 1.25" BORA Spacers (set 4) 5 or 6 lug All makes and models

Aluminum 1.25" BORA Spacers (set 4) 5 or 6 lug All makes and modelsAluminum 1.25" BORA Spacers (set 4) 5 or 6 lug All makes and modelsAluminum 1.25" BORA Spacers (set 4) 5 or 6 lug All makes and models

$220


with $25 Shipping

Shipping address different than Billing

/

Apply Now!

Pay Over Time

By making this purchase,
I agree to the Terms of Use

Visa MC Disc AmEx PayPal

Add to Cart

Add to Wish List

Custom Spacer or Adapter Quote

Details

This package includes 4-BORA spacers/adapters in 1.25" thickness for any 5 or 6 lug Chevy, GMC, Ford, Jeep, Toyota, Nissan or Dodge trucks.
Simply add your vehicle specs at checkout and we will ensure proper fitment!


The B.O.R.A. spacer is hub and wheel centric to create a perfect fit. This spacer will set the truck up just like a factory set up insuring a perfect ride. Anodized black spacer, grade 10.9 Steel studs, heat treated and zinc finished and lug nuts to bolt spacer to vehicle are included. These spacers come with a lifetime warranty. Made in the USA!


BORA Truck Spacers are manufactured right here in the USA with top-of-the-line, state-of-the-art, HAAS CNC machines, using only the best U.S. Alcoa 6061t6 billet aluminum. Unlike competitors, BORA provides a LIFETIME WARRANTY. BORA spacers will set your truck up just like a factory setup, insuring a perfect ride.


Lug nuts are made of 10.9 grade Steel, not stainless steel. The Open End Lugnuts we provide to attach our Adapter/Spacer kits are Cold Forged for increased strength and uniformity, our lug nuts meet or exceed OEM and aftermarket application standards. The Lug Nuts are backed by our ISO, QS and TS16949 Certified Facilities.



About Us
General application guide for spacers regarding trimming studs: 1" will work on all Toyota's without cutting the factory studs, stock or aftermarket wheels 1.25" will work on all Nissan's without cutting the factory studs, stock or aftermarket wheels. 1.75" will work on all Chevy, Ford, Dodge 1500's without cutting the factory studs on all stock and aftermarket wheels 2" will work on all Chevy, Ford, Dodge 8 Lug application without cutting studs on all factory and stock wheels HOWEVER, if your OEM or aftermarket wheels have "pockets" in the mounting pad, you may be able to use thinner spacers than above as the studs will poke through the spacer but sit in the "pockets" on the pads of the wheels. To know 100% simply measure exactly how far the stock studs stick out, measure how deep the pockets are on the mounting pad of the wheels and add them, that is the thickness spacer you may run. So 1" studs plus 1/2" pockets means 1.75" spacers or larger will work and 1.5" spacers will be cutting it close. Since 1996, Motorsport Tech’s Adapters and Spacers have been designed, built, tested, and proven in the toughest conditions on Earth - We’ve outfitted vehicles in the US Military for combat duty, desert racing pre-runners, Arctic rescue vehicles, major auto companies including Ford, Chrysler, and Goodyear, and have built parts for thousands of hardcore off-road enthusiasts around the world - including our own vehicles we drive daily. With our experience and acquired knowledge over the last 15 years, along with a recent expansion of our in-house production facility, we thought it was time to introduce a new 4x4 specific line: BORA. BORA stands for Bulletproof Off Road Adapters. And that’s just what they are. BORA adapters will be built to the same exacting standards of all Motorsport Tech parts (Made in the USA with Alcoa aluminum on state of the art American made Haas CNC machines) but now at a lower price! Lug nuts are made of 10.9 grade Steel, not stainless steel. Some of our Closed End lugnuts have a Stainless Steel Cap, but those are really only used to attach an aftermarket wheel the spacers or truck's factory studs. We do not make Stainless Steel Open End Lugnuts, no need for that. The Open End Lugnuts we provide to attach our Adapter/Spacer kits are Cold Forged for increased strength and uniformity, our lug nuts meet or exceed OEM and aftermarket application standards. The Lug Nuts are backed by our ISO, QS and TS16949 Certified Facilities.

Shipping
Please allow up to 15-20 business days as some spacers/adapters are custom made to order. Returns will be assessed a 25% restocking fee due to the custom nature and shipping fees. If the spacers have been installed or show any chips or witness marks, THEY CANNOT BE RETURNED. Please realize this is a custom part and we must adhere to this return policy, be sure you are keeping them before you install them. ******Please note 3 day shipping doesn't change the fabrication process/time. All orders ship standard ground unless 3 day shipping is chosen via drop down******

Warranty
Lifetime Warranty!

See more Spacers See Wheel & Tire Packages See all Store Items Wholesale Program

  1. I have a 2011 ford f150 and would like to adapt the wheels that came from a 2012 chevy 1500 which is also a 6 lug. What kind spacer would i need?

  2. I have a 2012 ram 2500 4×4 slt crew cab bighorn edition . I’ve recently purchased a set of 37×13.50r20’s m/t with 20″ mayhem arsenal 8104 wheels +18 offset. Now I’m about to buy the Rough Country 5inch suspension lift. What would be the ideal wheel spacers in my case?

  3. Purchased 2 inch spacers for my 2017 silverado 1500 with a 5 inch RC lift kit.. the lifted knuckles pushed the front track put wider than the rear.. the 2 inch should bring them even correct?

    • Yes, 2″ is the most commonly used thickness when fixing the track width issue when lifting a truck!

  4. I have a 1992 land cruiser with the usual 6×5.5, do you make adapters that will change it to 8×170 to fit my fords wheels?

  5. Hi I need help I have a ford f150 2002 I bought some rims think they were universal due to them have 12 holes they don’t fit and wanted to know if I could make them fit

  6. I just ordered the 1.25 spacer for my 2015 Ram. I know I will have to trim my factory studs. Question: if I ever decide to remove the spacer, will I have to replace the factory studs before I can run a regular setup again or will the studs still be long enough to use after being trimmed?

  7. I would like to order 2 in spacers for my 2010 f-150

  8. I have a 2016 Ram with factory 17″ aluminum wheels. What would it take to make the wheels flush with the fender.

    • Its as easy as taking a tape measure and putting a straight edge to the fender and measuring the gap. Keep in mind on most 1/2 ton trucks any spacer under 1.75″ will require your factory studs to be trimmed.

  9. Do you guys ship to Canada or not and would you allow me to pay from Canada and ship to the us I have a cousin in the us so I would save some money on shipping plus he’s coming down in the spring

    • Yes, we ship to Canada, it does cost extra. Please enter your billing address associated with the card, then email us right away with a new shipping address. Any more questions, please email us; info@customoffsets.com

  10. Can I put 1.25″ spacers on my 2016 limited Tundra with stock 275/55/20 A/T??

  11. i have a 14 silverado 1500 with gem replica 22s my truck is stock height can i run these wheel spacers and be okay?

  12. I’m getting a 2017 F250 soon, I’m going to keep the stock wheels and tires for a while but would the 1.25′ spacers work on my truck?

    • Not unless you are willing to trim your factory studs. Anything thinner than 2″ on an HD truck requires stud trimming. Yours actually requires a pinch of stud trimming even with a 2″ spacer.

  13. I have a 2016 F150 Lariat 4×4, I have the 2″ Motofab leveling kit installed and I want to run 35″ BFGs. Any ideas to prevent rubbing?

    • Trimming is the only option when moving up in size. Unfortunately the new F150s have a crash bar that needs to be removed when adding a bigger setup. Adding spacers will actually make it worse because your pushing the tires even further out.

  14. Want the 1.25 bora spacers for my 2016 Tundra d/c 4×4 stock rims.

  15. Looking for a solution to a 16 inch wheel for a Nissan XTerra, 2011. 6×4.5 6 lug, 30 offset. Wheels I have have -6 offset. Any suggestions?

  16. Hi I have pro comp 69 16×8 wheel negative -12 offset on a 2000 ford ranger 4×4 off-road I’m wondering what is the recommended siZe for those specifications ?

  17. Does bora make wheel adapters?

  18. looking for 1.25 inch wheel spacers 2016 gmc canyon

  19. Do you happen to know if I can run the 1.25″ on a stock 2015 Nissan Titan without any modifications. I have done some research but I never really found an answer. I don’t want them to rub, but also would like to keep the mud guards on, as its brand new anything to keep it nice

  20. I just got a set of four spacers I put them on and one is damaged now I need another one.

  21. What is your return policy?

Leave a Reply to Niko Cancel reply

We offer financingFacebook reviews