× My Account
Hello, Sign In or Create an Account
Get as low as 0% APR
Learn More* Through January 31st
Fitment Help
Wheel/Tire Quotes

Our Website

Online Store / Custom Lighting / Mounts / Brackets / Clearance /

SALE $75

with Free Shipping to lower 48 States

Add to Cart

Add to Wish List

Show Vehicles w/50 Inch Lighting

Show Vehicles w/40 Inch Lighting

Show Vehicles w/30 Inch Lighting

Show Vehicles w/20 Inch Lighting

Show Vehicles w/12 Inch Lighting

Show Vehicles w/6 Inch Lighting

Show Vehicles w/Cube Lighting

Show Vehicles w/Round Lighting

Show Vehicles w/Headlights Lighting

What's Included

1- set of roof brackets and hardware


Comes with all hardware needed for installation. Mounts are universal and work for both straight and curved 50" bars.
All 50" mounts attach using the door sill (they do not drill into the roof, but rather the door sill). These mounts were designed from our OLB bar that is 51.5" total length. For install instructions see http://www.customwheeloffset.com/install-instructions-for-50-light-bar-with-offroad-led-bars-custom-mounts/
These mounts come powder coated black.

If your looking for the dual bracket setup link is below!

***Please note some (1996-2002) Ford F150s #2002 brackets will require trimming of the drip rail if your truck has a c-channel drip rail***

All product in most cases ships 1-2 days after purchase with USPS with an average of 2-3 day shipping once leaving our warehouse. No expedited shipping available.

Standard 90 day warranty and limited lifetime warranty policies:

Standard warranty covers any failure due to manufacture defects up to 90 days after purchase. Non function lights, diode failure, etc. are covered! If it does not function properly, the product will be replaced! See warranty below for exceptions.

Limited LIFETIME warranty covers diode "led light" failure for up to 2 years after purchase date. If any diodes fail due to manufacture defects, we will replace it!

Professional installation is required. We are unable to take responsibility and/or warranty any products damaged or any damages caused due to improper installation. Black Label Lighting will not cover damages or product failure due to self-installation, so please test and verify product is working before installation is performed. If there are any issues upon receipt of the Black Label Lighting product(s), please notify us immediately - prior to installation (email sales@blacklabellighting.com). If Black Label Lighting is not notified of issues prior to installation, the warranty is void. Limited Lifetime warranty covers the failure of diodes "led light".

Warranty DOES NOT cover light bar or hardware finishes (powdercoating) and rusting of bolts as varying climates have adverse and uncontrollable effects on these finishes. Fuses, relays or wire harnesses are also not covered under warranty once installation has been completed. Any products which have been modified in anyway or product failure damaged due to collisions, off-road use, vehicle accidents, theft attempts, natural disasters, etc. will not be accepted as a return or covered under warranty. Black Label Lighting is not liable for any damages or charges incurred in the use of a product; these charges include but are not limited to legal tickets/infractions, on road use, fire, vehicle loss, rental vehicle, or replacement etc.

Return polices:

Your warranty will be void for the following reasons but not limited to: not providing sales receipt, proof of purchase, or proof of professional installation.

Black Label Lighting warranties are non-transferable from the original purchaser. All warranty claims are void unless a copy of the original purchase receipt is provided. Item must not be altered in any way. Return shipping of warrantied item is the purchaser's responsibility.

All non-warranty returns are subject to a 10% restocking fee or shipping cost, whichever is greater. The consumer is responsible for any and all shipping costs of a return as well as the shipment for exchange returns.

To open a warranty claim, please email sales@blacklabellighting.com with proof of purchase, photos of the issue/failure as well as a photo of the Blacklabellighting logo and the product turned on.

WARNING: Cancer and Reproductive Harm - p65warnings.ca.gov.

See more Custom Lighting See Wheel & Tire Packages See all Store Items Wholesale Program

  1. Hi i was wondering if your 99-16 F-250 brackets would work on a 02 F-150. I want the low profile look, it looks a whole lot better to me. Thanks in advance.

    • Those brackets won’t just bolt up and fit properly. Modifications would more than likely be needed. Trying to fit them on your truck would be at your own risk and we wouldn’t except any returns if modified.

  2. can i get these brackets for my 89 Toyota Pickup?

  3. I have a 2014 Silverado will these brackets work

    • 1500 or 2500?

      • I have a 2014 1500 silverado i have a 52 curved light bar will these fit it and on my truck

        • The #900 brackets should work for that light bar! Please make sure the overall length is 52 inches and not longer. In most cases the lens of the light is whats listed as a size. So a light bar with a 52 inch lens might be 54 inches overall length.

  4. Will this set up fit on an 2011 f50

  5. 06 Expedition, will it fit?

    • We wouldn’t be able to verify that fitment Will. That would be something you would need to take the gamble on since we haven’t had anyone try it. You would probably need to try the #200 brackets

  6. I have an 03 dakota will it fit

  7. will this mount fit a 2016 f150 ?

  8. I have a 2008 Ford Explorer sport track. Will these brackets work for my truck?

    • We have sold the #700 brackets to customers with Explorers and have never got confirmation if they worked. I would assume they did, no news is good news as they say!

  9. Will this mount fit on 2012 Silverado?

  10. Fit second gen Ford Explorer?

  11. 2005 ford expedition

  12. Do you have brackets for a 2018 Ram 1500 and if so what light bar would work best to keep in front of windshield/ low profile?

  13. Do yall make brackets for a 96 Dodge Ram 1500?

  14. I have a 93 gmc yukon do you guys have brackets for it

  15. Any specific light bar that fits the mount?

    • No sir, they were designed off of a light bar that was 51.5″ in total length. Most light bars are measured 50″ due to the lens length. They will work with in a half inch + or – of 51.5″

  16. Is there a set that will fit my 1998 chevy k1500 z71? I want the low profile ones. My light bar is a 50 1/2″ curved

  17. Will it fit a 97 f150?

  18. I have a 2007 Dodge Dakota and I was wondering if these mounts would work? If so, would it fairly low profile? Thank you.

  19. do you have brackets for 01 ford f150 52 inch straight light bar. the bar measure at 51.3 inch

  20. Does it fit 07 h3?

  21. Iā€™m looking for light bar mounts for my 01 explorer I have a 50 inch light bar and want to mount on the roof

  22. What is the “2007 Classic”?
    In my case a 2007 Tahoe. How do I know if I have the “classic or not?

    • Classic refers to the body style. You either have the “classic” 99-2007 or 2007-13 newer body style

  23. iv been looking all over the internet or a light bar mount for a 98 dodge durango.anybody know were I can find one on line

    • Sorry Christopher I don’t šŸ™ I would probably see if there is a fab shop local to you that would make you a set of brackets. You probably aren’t going to find any on the internet unless maybe a forum?

  24. Will this fit 2016 Ram Rebel 1500?

  25. will this fit a 2002 Toyota tundra?

  26. Well y’all’s 2002 model brackets work for my 1998 Ford Expedition XLT

  27. Question, own a 2003 Supercrew FX4 will bracket #2002 work without damage to weather seal and will I have to cut off the small drip rail off Thank you.

  28. Will the 2002 or 700 series work for a 96 Ford Explorer?

  29. I have a 96 yukon, is there a light bar that will fit on the roof above the windshield, thank you

  30. Hello..I have a 2013 ram 2500 powerwagon,my wife ordered me a 52in straight light bar.I cannot seem to find brackets for my truck.would these work? Thanks

  31. I own a ’94 Ford Ranger XLT, I noticed your model 700 fits a Ranger. Are those brackets for a 42″ light bar? Or do they accommodate for the 5″ of overhang for a 52″ bar? Thanks for your time.

  32. hey bud I am looking for a low profile 50in curved light bar bracket. I looked on yalls low profile brackets and could not find one do yall make one or can yall make them.I just dont want my light bar stuck way up in the air.

    • Thomas, I’m not sure what make and model truck you have but what we have listed is what we have available. We don’t produce them. They are made by Offroadledbars.com

  33. I have an 06 Dodge Dakota and I am looking for a curved bar and door jam brackets to fit my truck

  34. I have a 2014 ram 1500 what would be my best fit. Curved or str8. And witch mounts would you recommend. I don’t want to drill my roof. So def. want door mounts. Thanks

  35. Would this work on a 2001 Toyota Tundra with a 50″ curved led light bar

  36. will it work with a 52 inch curved on a 98 Chevy Silverado z71

    • Yes, you should be able to manipulate the brackets enough to fit a 52″ light bar. Make sure the whole light bar end to end is 52″ and not 53″-54″

  37. Can you send me a picture of an f-150 2004-2008 with the bracket installed with a curved light bar?

  38. I’m looking for 50″ led roof mount brackets for a 1998 Chevrolet Silverado. I see you did have them. Do you have any now?

  39. would the 1993-2012 ford ranger bracket fit my 2002 mazda b4000?

  40. I have a 2015 Ford Explorer and I have a 52” light bar and I’m looking to see if you have any mounts that would fit ? I didn’t see any on your list.

    Thanks any help would be great full.

  41. Wondering if these brackets will fit a 50″ curved light bar that is 52×6.1×3.2 inches.

  42. i have a 93 chevy z71 is there anyone that has used these mounts on an obs chevy that can send me pics of it

  43. 2008 ranger when i measure i come up with a 48 inch roof with your mounts will a 50 inch curve fit ???

  44. Hey I’m just wondering if there’s any mounts out there or maybe yall sell that you don’t have to put bolts through the roof? I have a 2010 ford ranger and I just bought a 52 inch lightbar for it and I’m looking to buy some brackets that don’t mount thought the roof using bolts, is this design gonna leave holes in my roof or anywhere? And will water be able to leak through?

    • There are no holes in the roof. They mount to the door sill and when you caulk the holes before you tighten the grip-serts down they won’t leak.

  45. Im trying to check out and if wont let me. it takes me to paypal and says your last action could not be processed

    • Hi Clay, not sure what was going on with the website at the time. Have you tried again since you left this comment? You can call us at 920-221-0110, Line 3, Monday – Friday, 9 am – 5:30 pm, CST.

  46. in the vid was the bar a 50 or 52 inch, it looked like there was at least 3 inches or more of gap with one side in and was tweaked easily in to place, if a inch and a half moves in then it would move out as well right?

    • Your more than welcome to try and get them to work on that size light bar. It will be at your own risk and a restocking fee will apply if it doesn’t fit and you decide to return them.

      • in the how not to dryfit vid what size bar was used, not going to send anything back just want to know what iam working with

        • All brackets are designed for 51.5″ total length light bars which is the size of the bar in the video.

  47. watched the vid on how not to dry fit lightbar , 99-03 f 150 is the truck in the vid and when u measured bracket to bracket it was 53.5 inches so why cant a 53.5 or a 54 work if the bracket bends a little

  48. I have a 2002 Chevy Tahoe Z71 and a single lightbar. What mount do I need ?

  49. will the low profile brackets for the 1999-2015 F250 fit my 2009 f150 platinum 52 inch curved bar.

    • As long as the total length of the light bar 52″ from mounting point to mounting point. That’s only a 1/4″ on each side for the size of the light bar these brackets were designed for.

  50. Got an 02 avalanche! Will this work?

  51. #200 will they fit my 2006 Expedition, i have a 52in curved. 52in exactly between mounting points. Do they mount in the door?

    • Hi Chris, We have NOT fitted any light bar mounts to a Ford Expedition, you would have to order at your own risk and we can’t be sure they will work and a 20% restocking fee may applies if you return the order. Our mounts attach using the door sill (they do not drill into the roof, but rather the door sill). Hope this helps

  52. Will any of these work on an ’02 trailblazer?

    • Hey Shane,
      each bracket is specifically designed for each make and model. Being the cab is smaller on the trailblazer none of the above brackets will work. Sorry we couldn’t help!

  53. will the 50” fit a 1990 for full size bronco

  54. can this be used with any brand or only C.O. light bars?

  55. For Part #2002 is it made for a Curved or Straight light bar?

  56. Is there anyway they will fit a 52″ light bar

    • Javier: If your light bar is 52″ from the mounting hole to the mounting hole, these mounts will work. However if it is a true 52″ and measures about 53.5″ mounting hole to mounting hole, it will not work. It is important to measure your bars and make certain they do not exceed 52″ max. Hope that helps!

  57. I ordered these mounts yesterday but I haven’t got a confirmation yet if the purchase went through…

Leave a Reply