×
SHOP
BRANDS
ABOUT
RESOURCES
Carli Suspension Dodge 3

Carli Suspension Dodge 3" Leveling Performance 2.0 System (1994-02 2500/3500 4WD | Diesel)
CS-DP20-94

Be the first to review this product

Shop By

Monthly Payments

$1935


Free Lifted Shirt Included

Free shipping to the lower 48

Financing Available

Please allow 1-3 days to confirm the order with the manufacturer.

Part Number

CS-DP20-94

Details

The Performance 2.0 system is designed for people seeking the best ride on and off-road on a budget; perfect for those that want to have a little dirt-road fun in their 2nd Gen Diesel or 3rd/4th Gen Hemi truck without losing the on-road ride quality or usability for which the truck was designed. You're no longer limited to the highway while gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. Utilizing Bilstein 7100 2.0" Remote Reservoir Shocks, we've developed a shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The Bilstein 7100s boast steel construction with clear powder coat for durability, are fully rebuildable and feature FK bearing rod ends for superior performance. This system was tuned and rides best with the Full Progressive Leaf Springs.

The Details: Your truck will sit 2.5"-3" higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1"-2" via the customer's choice of a Progressive Add-A-Pack or Full Progressive Leaf Pack. The Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability. The optional Full Progressive Leaf Pack replaces the entire factory leaf spring assembly increasing travel and drastically increasing comfort throughout the entire usable travel stroke at the cost of a 15% payload reduction from a standard 2500. This payload reduction can be supplemented back to factory 3500 SRW capacity with the addition of the Long Travel Airbags for the best of both worlds; ride quality and payload capacity/load control.

When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there's only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with 1/2" FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli's optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8" FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).

When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver's side 3/4" and back toward the cab 1/2". This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also recommend the purchase of a set of extended control arms to shift the axle forward to its new center of travel.

Wheel and Tire: This system will fit up to a 37" tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9" wide with 5.75" of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35" tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

What's Included

  • CS-DMRC-03-H: Multi-Rate Coils
  • CS-DP20SPKG-94: Carli Tuned Bilstein 7100 Remote Reservoir Shocks, Clevises, Limit Straps, Reservoir Mounts

Fitment

  • 2002 Dodge Ram 2500 Base 4WD
  • 2001 Dodge Ram 2500 Base 4WD
  • 2000 Dodge Ram 2500 Base 4WD
  • 1999 Dodge Ram 2500 Base 4WD
  • 1998 Dodge Ram 2500 Base 4WD
  • 1997 Dodge Ram 2500 Base 4WD
  • 1996 Dodge Ram 2500 Base 4WD
  • 1995 Dodge Ram 2500 Base 4WD
  • 1994 Dodge Ram 2500 Base 4WD
  • 2002 Dodge Ram 3500 Base 4WD
  • 2001 Dodge Ram 3500 Base 4WD
  • 2000 Dodge Ram 3500 Base 4WD
  • 1999 Dodge Ram 3500 Base 4WD
  • 1998 Dodge Ram 3500 Base 4WD
  • 1997 Dodge Ram 3500 Base 4WD
  • 1996 Dodge Ram 3500 Base 4WD
  • 1995 Dodge Ram 3500 Base 4WD
  • 1994 Dodge Ram 3500 Base 4WD

**This part fits a ton of vehicles, so let’s check to see if it fits yours. Don’t see it on the list above? No worries, type your vehicle in the search bar above to see the full list of compatible vehicles.**


Product Reviews (0)

Write a Product Review

Be the first to write a review!

Related Videos


About Us
We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping
Shipping times vary depending on item and immediate availability. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise. Always inspect your items immediately upon receipt and notify us within 5 business days if there are any concerns, damages, or missing items.

Warranty
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com NOTE: Returns not related to a warranty issue may result in a 20% shipping, handling, and restocking fee. Please also note that you have 30 days from the delivery date to inventory and verify lift kit components. You must contact us within this 30 day period in order to have missing/damaged parts sent to you free of charge. After 30 days from date of delivery any missing parts or damaged parts will be the customers expense to replace and/or fix.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

See More Suspension Lifts See Wheel & Tire Packages See all Store Items Wholesale Program
Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.

Sign up to be notified when item is back in stock

Enter your email here and we'll let you know when this is in stock again