2014 Ram 2500
Stock Stock 20x8 54
Firestone A/T 285/60
OEM Stock

1 2014 Ram 2500 Dodge Stock Stock Stock Silver Tucked

Stock OEM's 2014 Ram 2500 4WD
Stock OEM Factory 20x8 +54

Wheels
Stock OEM Factory - Silver
Front: 20x8
Offset: +54
Backspacing: 6.6
Stance: Tucked
Rear: 20x8
Offset: +54
Backspacing: 6.6
Stance: Tucked
Tires
Firestone A/T
285/60
33.5"x11.2"
285/60
33.5"x11.2"
Details

Suspension: Stock

Suspension Brand: OEM

Rubbing: No rubbing or scrubbing

Trimming: No trimming

Front Wheel Spacers: None

Rear Wheel Spacers: None

Details: OEM offsets for 18" and 20" Ram 2500
Bolt Pattern 8x165.1

Add to Favorites Claim this Vehicle Add My Ride Edit My Ride Similar Offsets Gallery

Do 20x8 +54 wheels with 285/60 tires fit on a 2014 Ram 2500 4WD OEM Stock?

Yes it does! This 2014 Ram 2500 4WD is running Stock OEM Factory 20x8 +54 wheels Firestone A/T 285/60 tires with OEM Stock suspension, needs No trimming and has No rubbing or scrubbing. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Tucked. Also remember spacers impact fitment, this ride is running None in front and None in rear.

** We always recommend finding a couple vehicles that have achieved this fitment, as this information is solely based on the owner of this vehicle. Although we review every gallery page, there are so many variables we cannot verify every fitment is possible or accurate. However, if all the other kids are doing it, IT MUST FIT!!


Optional for $69:
CO Wheel Shine kit for Painted Wheels


  1. I HAVE A 2014 RAM 2500 DIESEL AND WANTING TO RUN 35X12.50X20 DURATRAC’S ON 20X9 WHEELS WITH 2.5 INCH LIFT, WHAT BACKSPACE WOULD I NEED TO NOT RUB AND HAVE TIRES EVEN WITH FENDERS

  2. 14 Ram 2500, have 2.5″ leveling just wondering if I want to go down to 18″ rims what offset I can go and if 35’s will work without rub. I like the look of a little rubber outside the wheel well. so +12 or +18. can get a good deal on the +12 offset but was told I should go with +18 offset. Thanks for your opinion.

  3. I have a 2016 Dodge Ram I have rims on it now 17×8.5 + 10mm offset. I was wondering if 17×9.0 with -12mm offset will fit. I run 35/12.50 tires with 2″ level kit and nothing rubs now.

  4. I have ’14 ram 2500 on a 2″ level. I want to run 22×12 on 35s. What amount of offset do you recommend?

  5. Looking to run a 20×10 0 offset with 275/65R20 on my 2016 Ram 3500… will this fit at stock ride height???

  6. Hello have a 3500 cummins with a 2″ leveling kit. Been search forums to see if any one has ran a 20×12 with a -44 offset and if so what the largest Tire you. An put on with out clearance issues. I do haul quite a bit do don’t want to bother that.

  7. Will the factory 2013-2017 20×8 rims fit my 2012 ram 2500 4×4 with some 35×12.50×20

  8. 2014-2500 Ram what’s the tallest tire I can fit without rub. 295/75/18 or 305/75/18?

  9. Can I run 20×12 with a -19 offset with 33s on my stock 2016 4×4 dodge ram longhorn edition that has a 2inch leveling kit on it?

  10. I have a 2016 2500 Ram leveled front and rear 2.5 in lift with the 275/70r18. I want to go with a 35×12.50r20 but don’t know what back spacing I will need to not rub. State law says tires can’t stick out past the fender flares.

  11. Can I run 35×12.50 on my stock 20×8 rims for my ram 2500 stock

  12. I have a 2014 Ram 2500 gas,with a 2.5 leveling kit on the frt. It has 18″ wheels & firestone 33″ tires that are stock,I would like to go to a 17×9 Wheel & bfg Ko2 35×12.50 which are only 34.5. Will i have any problems? I never go off road or haul anything. THANKS RON

  13. I have a 2014 ram 2500 SLT with 18 inch rims . Can I put 20×9 on it with 33 -12s

  14. I have a 2014 2500 cumins with 2.5″ leveling kit. Looking to upgrade my oem wheels to 20×9. I’m looking at putting goodyear duratrac 325x60x20 on them. Would like them to come out even with my stock fender flares on the Laramie modle. Or sure what offset I would be looking at to achieve this. I currently have the stock wheels and tires and they are tucked in about an inch with the oem 20×9 rim. Also would you know if there would be any rubbing? Thanks for any info in advance

    • We are doing the same thing on a ’15 2500 We are going to go with a 20×9 with somewhere close to a +20 to get it close to even with fender flares. Have you already upgraded?

  15. How far will Fuel Vapor 20inch (20×9) wheels stick out roughly on my stock 2014 ram2500. The wheel backspacing for those fuel vapors is 3.7″

  16. Will the new 8 lug 20″ Ram factory rims with 275-60-20 tires fit my 2008 (8 lug) Ram 2500? Any clearance issues for the Rims & Calipers?

    • We wouldn’t think there would be any issue. We don’t do a lot of stock fitment, I would check out the forums or a google search, I am sure lots of guys are doing this upgrade.

Leave a Reply

All gallery pages and information are added by the owners, or representatives of the owners of the vehicles. Custom Offsets LLC is not responsible or liable for the information posted on this site. Use at your own risk and always find multiple sources to confirm your wheel, tire, and suspension kit buying decision. 14550 views.

We offer financingFacebook reviews