Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.
× My Account
Hello, Sign In or Create an Account

Our Website


2017 Chevrolet Colorado
Raceline Shift 18x9 -12
Nitto Ridge Grappler 295/70
Zone Suspension Lift 5.5"

JEFFRY.C.BEARD@GMAIL.COM's 2017 Chevrolet Colorado 4WD
Photography by: JCBGrumpy
Raceline Shift 18x9 -12

Chevrolet Colorado Wheels
Raceline Shift - Black Tint
Front: 18x9
Offset: -12
Backspacing: 4.5
Stance: Aggressive > 1" outside fender
Rear: 18x9
Offset: -12
Backspacing: 4.5
Stance: Aggressive > 1" outside fender
Nitto Ridge Grappler
Suspension: Suspension Lift 5.5"

Suspension Brand: Zone

Suspension Details: Zone 5.5" Lift - slightly more bounce in the ride. I spend 2-3 hours a day in the truck commuting and find the ride to be close to factory.

Rubbing: Slight rub at full turn

Trimming: Minor Plastic Trimming

Trimming Details: Trimmed front inner fender waffle back 2+ inches as well as outside fender just enough to allow tire to pass freely; also trimmed back some metal in aft wheel well although I did this prior to installing lift, so unsure if it was totally necessary. Not hard to do on your own. Also, these wheels WILL rub on your caliper for this YMM truck...expect to grind down your calipers a bit. Again, not hard.

Front Wheel Spacers: None

Rear Wheel Spacers: None

Details: Zone recommends the 295/70/R18 for t his lift...which is a 34" tire. I've seen up to 33" on this truck and 35" on ZR2s. Took a chance...the 34s fit perfectly and look awesome! My thanks to CO and Paul Sangineto for the inspiration.

Add to Favorites Add My Ride Edit My Ride Similar Offsets Gallery

Do 18x9 -12 wheels with 295/70 tires fit on a 2017 Chevrolet Colorado 4WD Zone Suspension Lift 5.5"?

Yes they do! This 2017 Chevrolet Colorado 4WD is running Raceline Shift 18x9 -12 wheels Nitto Ridge Grappler 295/70 tires with Zone Suspension Lift 5.5" suspension, needs Minor Plastic Trimming and has Slight rub at full turn. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Aggressive > 1" outside fender. Also remember spacers impact fitment, this ride is running None in front and None in rear.

** We always recommend finding a couple vehicles that have achieved this fitment, as this information is solely based on the owner of this vehicle. Although we review every gallery page, there are so many variables we cannot verify every fitment is possible or accurate. However, if all the other kids are doing it, IT MUST FIT!!

Related Videos

All gallery pages and information are added by the owners, or representatives of the owners of the vehicles. Custom Offsets LLC is not responsible or liable for the information posted on this site. Use at your own risk and always find multiple sources to confirm your wheel, tire, and suspension kit buying decision. 188 views.